200 - 400

  • Double-suction, base-mounted Series HSC³ pumps are available in 2” through 10” sizes. Motor sizes through 300 HP. Flows to 6500 GPM and heads to 400 feet. Bronze-fitted construction with a maximum working pressure of 175 psig.
    • Higher hydraulic and energy efficiency
    • Exceeds proposed DOE efficiency regulations
    • Maximized hydraulic coverage
    • Stainless steel impeller for performance and durability
    • Innovative shaft jacking coupling for ease of maintenance
    • Available with Integrated Technologic drives for sensored and sensorless applications
  • True back pullout design for fast, simple, cost effective maintenance. Integrally cast volute foot provides rigid, stationary support to maintain pump alignment even during maintenance. Center drop out spacer coupling supplied as standard. Provides for bearing frame removal without pump or motor movement. Original alignment is maintained. Fabricated heavy-duty base plate supplied as standard. Includes closed ends and open top to provide ease of access for complete grouting. Computer aided system sizing and selection with ESP-Plus. i-ALERT Continuously measures vibration and temperature at the outboard bearing.
  • Back pullout design allows ease of maintenance. Self-flushing mechanical seals. Aluminum bronze shaft sleeve. Enclosed, balanced impeller for quiet, vibration free performance. Heavy duty cast iron volute construction for 175 PSI working pressure. Jacking bolts provide ease of volute disassembly. Gauge tappings. Hydrostatic testing of each pump is standard.
  • Bronze Fitted Construction Cast Iron Volute Brass Impeller Standard Seal Buna-Carbon/Ceramic 0 deg. F to +225 deg. F (-18 deg. C to +107 deg. C) E 175 psi (12 bar) W.P.
  • The B&G built-in mechanical seal with anti-vortex baffles in the seal chamber provide five times the flow around the seal face versus an externally flushed seal. Costly and inefficient external flush lines are not needed. In-line mounting eliminates the need for special pads or foundations in most cases. Standard piping supports on both sides of pump are required at all times. The support ring located on the underside of pump volute is designed to provide ground support when necessary. Pump may be mounted horizontally in vertical piping if desired. Back pullout design allows servicing without disturbing the piping. Repairs can be made quickly and easily. Thus down-time is kept to a minimum. Impeller balanced to ANSI/HI grade G6.3 results in quiet, vibration free operation.
    • Hydraulic coverage to meet all your design requirements
    • Volute & Cover Plates: Cast iron ASTM A159 (35,000 psi)*
    • Impeller: Low Zinc Silicon Bronze ASTM 876
    • Sleeve: 304 Stainless Steel
    • Hydraulic coverage to meet all your design requirements
    • Volute & Cover Plates: Cast iron ASTM A159 (35,000 psi)*
    • Impeller: Low Zinc Silicon Bronze ASTM 876
    • Sleeve: 304 Stainless Steel
    • Hydraulic coverage to meet all your design requirements
    • Volute & Cover Plates: Cast iron ASTM A159 (35,000 psi)*
    • Impeller: Low Zinc Silicon Bronze ASTM 876
    • Sleeve: 304 Stainless Steel